Taco Series 005 Cartridge Circulator Pump

Taco is one of the top 3 pump companies in the world, they have a huge selection of circulator pumps and parts you can think of. The Taco 005 Cartridge Circulator Pump was created for a wide variety of residential and light commercial water circulating applications. The Taco Pump Series 00 consists of replaceable cartridges that have all of the mobile parts of the pump so you don't have to replace the entire pump when something goes wrong, it makes it easier for you to replace the part itself.

The pump is compact and is a direct drive creation and it is low power which is great if you are doing a high efficiency job. The pump has a flow range of 0 to 18 GPM ( gallons per minute), the head range is 0 to 9.5 feet. The minimum fluid temperature the pump can handle is 40 degrees Fahrenheit and 4 degrees Celsius. The maximum fluid temperature the pump can handle is 230 degrees Fahrenheit and 110 degrees Celsius if the pump's construction is Cast Iron. If the pump is Bronze then the maximum fluid temperature is 220 degrees Fahrenheit and 104 degrees Celsius. The maximum working pressure of this pump is 125 PSI and it is available in connection sizes of ? inch, 1 inch, 1-? inch and 1-? inch flanged.

The Taco 005 Pump has a high capacity output, it is of compact design and the pumps runs quietly and efficiently. The one of a kind replaceable cartridge is great because it can be fixed on site rather than pulled and brought back for repair. The direct drive of the pump keeps a low power output. The 005 pump is self lubricating so there is no need to oil it. There is no mechanical seal in this pump. This pump is so reliable that the maintenance on it is virtually non existent.

The Taco 005 Cartridge Series Circulator pump comes in Cast Iron or Bronze construction. There are so many applications that this pump is used for, here are some of the most common uses. Hydronic Heating , Add a Zone Additions, Zoning with Circulators, Chilled Water Cooling and Domestic Water Systems.

Here are the different pumps in the 005 Series Pumps

The Taco 005-F2 pump is a 1/35 horse power and comes in ?", 1", 1-?" and 1-?" flanged. This pump costs around $ 120.00

The Taco 005-F2-IFC pump is 1/35 horse power with ?" 1",1-?" and 1-?" flanged , the pump is iron and costs around $ 135.00.

The Taco 005-ZF2-4 18, it is also a 1/35hp with ?", 1", 1-?" and 1-?" flanged, this pumps is for Priority Zoning Iron Pump. This pump costs around 190.00.

The Taco 005-BF-2 18, this pump is 1/35hp with ?",1", 1-?" and 1-?" flanged Bronze Pump. It can be used with Taco Shut off Freedom flanges, This pump costs around $ 230.00.

The Taco 005-ZBF2 18 has 1/35hp with ?", 1", 1-?" and 1-?" flanged, it is a bronze pump and it used fro Priority Zoning and can be used with Freedom Flanges.