Another great faucet line in the Delta manufacturing line is the Michael Graves Collection. These bathroom faucets are just gorgeous. They offer a very contemporary look for the average bathroom. This series of faucets have almost the same style with slight differences. This Michael Graves Collection Faucet is model number 2588-SSGLHP and the Handle is model number GH290SS. The faucet is a 7 inch high arc and a 5? long spout. The faucets in this collection are very sleek and would look great matched up with a Roman Tub. More...

The Watts Series Isolation flanges were created to isolate circulator pumps to encourage circulator pump replacement or even repairs. This series of flanges that range in sizes from ? inch to 2 inches. The flange has a brass body and the flange bottom is loaded blowout proof stem. More...

An expansion tank is used to maintain a balanced pressure through the water supply system by maintaining the pressure below the T & P relief valve setting. The Watts expansion tanks are made fro both drinking and non drinking water supplies. When water gets heated it expands and because water is not compressible the extra volume that the water created by the expansion has to go somewhere that is where the tank comes in. The warmer the water the more it expands, More...

A backflow prevention instrument is used to protect the water supply from any unwanted contaminations. They protect the drinking water from harmful attackers that can range from minor, moderate and very hazardous materials. There are over 15,000 cases of water contamination that is caused by a faulty backflow preventer. In some cases of severe contamination the results can be fatal. More...

The AS-B Bronze Air Separators are mainly used in commercial and residential hydronic heating systems. They are uses to separate the air from the water in the piping system. The air separator is made up of a bronze body construction that has tapings fro a boiler fill expansion tank. More...

The B&G Series PL pumps are designed for residential and commercial heating and the drinking water systems. These pumps are dry motor pumps and they perform 25 percent better than any other pump on the market today. The rotors are precision machined and balanced for a above and beyond performance. More...

Not only does B&G have a great pump inventory but the rest of their products are impressive as well. The B&G Flo Control Valves are designed to stop gravity flow in forced hot water system and then allow the summer/winter operation of indirect water heaters. These are one of a kind valves, they are a straight/angle combination that is available in sizes ranging from ? inch to 2 inches. The top is removable so you can clean it out easier and you can service More...

This air separator is designed to automatically remove air bubbles found in the hydronic systems. Bell and Gossett's WASB-Jr's air separator works like this, when the fluid enters the EASB-Jr, the velocity is lowered by creating a low pressure spot. The bubble form they float to the top of the air separator More...

The DuraGlide System allows other components to work as one unit to help eradicate the sometimes seasonal freeze up. The SSF pump is an energy conversation pump that uses low wattage. This pump also has a 3 year warranty. Automatic timers and Aqua stat accessories are also available on these SSF pumps. More...

This B&G pump is an iron body circulator pump it is one of the best circulator pumps in the business, Bell and Gossett backs it up with a 3 year warranty because they feel it is that good. This pump has a high starting torque which is very important it keeps the start up reliable in any season. More...