B&G Series PL Pumps

The B&G Series PL pumps are designed for residential and commercial heating and the drinking water systems. These pumps are dry motor pumps and they perform 25 percent better than any other pump on the market today. The rotors are precision machined and balanced for a above and beyond performance. The solid stiff shaft is one of a kind design that is constructed on a highly durable steel alloy that will not crack under the thermal stresses and some other pumps have been known to do.

The XL-11 is B&G trademarked precision crafted bearing system, the pump is permanently lubricated so you don't have to worry about it seizing. The pump is almost 100 percent maintenance free. The pump is a close coupled design that will increase the longevity of the pump and the efficiency of the pump. It is dependable even in the seasonal start ups. It will not freeze.

The maximum working pressure of the PL series is 150 psi and the maximum operating temperature is 225 degrees Fahrenheit and 107 degrees Celsius. There are different models with different dimensions, here is a guide to help to narrow down which pump you may need.

Part number 1BL012 has dimensions of 9.0H x 6.5W x 4.5D and the model number is PL-30. It costs around $ 250.00. This pump is cast iron.

Part number 1BL001 has dimensions of 9.0H x 6.5W x 4.5D and the model number is PL-36. It cost around $ 300 and is cast iron

Part number 1BL002 has dimensions of 9.5H x 8.5W x 4.5D and the model number is PL-45. This pump is cast iron and costs around $ 300

Part number 1BL016 has dimensions of 9.5H x 8.5W x 4.5D, the model number is PL-50. It is a cast iron pump and costs around $ 340.00

Part number 1BL032 has dimensions of10.0H x 6.5W x 5.0D, the model number is PL-55. The pump is cast iron and costs around $ 480

Part number 1BL034 has dimensions of 10.0H x 8.5W x 5.0D , the model number is PL-75. The pump is cast iron and costs around $ 640

Part number 1BL063 it has dimensions of 11.0H x 8.5W x 5.5L, model number is PL-130/2. It is a cast iron pump and costs around $ 675

Part number 1BL070 has dimensions of 11.0H x 8.5W x 5.5D. The model number is PL-130/3, it is cast iron and costs around $ 680

how clean grease traps pumps hot water copper plumbing unsolder repair home depot lowes supply ancient times greek