Adding a Drip System to an Existing Irrigation System

You Are Here: Home » Irrigation-systems » Adding a Drip System to an Existing Irrigation System

Adding a Drip System to an Existing Irrigation System

Irrigation systems are widely used and are quickly becoming essential to the well being of gardens and lawns across the world. With the extension of most areas there is one problem that appears: the need for extra irrigation. New plants appear in the backyard and in a lot of situations you might want to implement something new, something better. Adding a drip system to an existing irrigation system might be the best solution because of a variety of facts.

A drip system is perfect for large plants but not suitable for trees and such yard elements. By delivering only the right amount of water directly to the roots of a plant you might end up with a very cost efficient solution. If you extend your existing irrigation system with adding a sprinkler system you will surely use more water than you need. Also, keep in mind that with extensions you will also face higher needs from the water pump and the water source used. You would not want to build an extension and then end up with not enough pressure to power the entire system. An advantage to adding a drip system to an existing irrigation system is that water is not wasted and only the right amount is delivered in a drip by drip motion. This means you can usually operate both a sprinkler irrigation system and a drip system at the same time without having problems. If this can not be done automation saves the day. All can be programmed to work in cycles. For instance, you can irrigate with the existing irrigation system first and then let the drip system run for as much time as it is needed. Sprinklers deliver much more water so these need to be operated first. You could always purchase a new water pump that is powerful than the existing one in case this is needed. There are locations that will even take in your older pump and you would only need to pay for the difference.

Adding a drip system to an existing irrigation system is a process that should be left for professionals although you could do it yourself with proper research and a will to succeed. If anything goes wrong you can always apply small changes to the drip irrigation system and see if that solves the problem. There is a lot of material available but the hard truth is that drip irrigation systems are hard to install when compared to regular sprinkler irrigation systems.

hybrid woodstove heating house bell gossett boiler explosion problem replacing exploded reasons sump pumps taco