Reddy Heater 30,000 BTU Propane Convection Heater

This Reddy Heater 30,000 BTU Propane Convection Heater has 15,000 to 30,000 Btu?s. It is an indoor heater that has a thermostat. It is great for barns, garages, barns and homes. It can heat up to 1,000 square feet. It is a clean burning unit which is great for the environment. There are no vents to hook up so the installation is easy. It can use a 100 minimum pound propane cylinder. But this heater is not recommended to be used over 4,500 feet. The company offers a 2 year warranty.

The Reddy Heater 30,000 BTU Propane Convection Heater comes with the piezo igniters, front panel, grill guard, control valve, a valve retainer nut, a heat shield, cabinet. Deflector assembly, igniter cable, nut, ODS/pilot assembly, burner, pilot tubing, injector, mounting bracket, gas regulator, hex nut, outlet tubing, inlet tubing, a baffle , control knob and of course the owner?s manual.

You have to check with the state you live in because some states have a restriction on the vent free installations. You can set what ever temperature you wish because of the thermostat.

If you set it on an optimum temperature you can get about 72 hours at the highest setting and about 144 hours on the lowest set. So try to find the happy medium to get the best use as well as a temperature you can live with. Another great safety feature is that the flame on the propane heater is behind a metal sheet and that means the debris can?t get to the propane and start a fire. It is CSA Certified.

This Reddy Heater 30,000 BTU Propane Convection Heater is very affordable and works great in the home and in workspaces. It only takes 5 or 10 minutes to heat up a room. You can find this heater by shopping in your local hardware store or you can purchase one online.

little giant big john sump pumps what radiator irrigation drip microirrigation