Is Cutting Out a Pipe The Right Way To Fix a Clog?

You Are Here: Home » About-plumbing » Is Cutting Out a Pipe The Right Way To Fix a Clog?

Is Cutting Out a Pipe The Right Way To Fix a Clog?

People tend to think that cutting out a pipe is the right way to fix a clog but fail in analyzing the subject properly. First off, we need to think about what kind of clog we are talking about. If it is a drain clog that can be accessed differently there is no sense in cutting out the pipe as this will not only not solve the problem but will also be costly. On the other hand we might also be faced with the possibility of having such a clog that there will be no solution but cut the pipe and replace the affected portion. The good news is that this is a very rare situation and the only person that should give the go ahead for such a procedure is a specialist plumber and only after trying different possible ways to get rid of the clog.

The most common way to get rid of a pipe clog is to use a special plumber snake. Access to the pipe needs to be possible and depending on the type of the clog we might be dealing with different snakes to be used. We even have special electrical power snakes aimed to clear various hard to get rid of clogs. Also, there is a strong possibility that your clog appeared because of various materials that got stuck inside the pipes and got harder. This means that they can not be removed as the debris is stuck. Sometimes a power snake is not enough and we might need to make the clog easier to get rid of. Boil a bucket of water and throw it inside the pipes in order to aid the work the snake will do later. You could also add vinegar to the mix, once again in a solution that is boiled. Applying such hit through a liquid on the clog might make it a lot easier to be removed. If this fails you could purchase some special solutions from a plumber shop, which are aimed at dealing with some hard to remove clogs.

Only after trying everything possible should you consider the last possible solution: cutting the pipe. Again, there is a need to put en emphasis on the fact that only a plumber should give the go ahead to do this as there might be some other ways to get rid of the clog that are not common but might work.

plumbing schools plumbers training copper unsolder repair chugach sewer & drain help what wheel cylinder